Gorenje G6N4AX Manual de Instruções descarregar pdf (Página 17)

252569

• On the lower side, the cooking hob is ﬁ tted with a gas

connection plug with a EN ISO 10226-1 / -2 or EN ISO 228-1

(Depending on the country-speciﬁ c connection regulations.)

thread.

• Also supplied with the appliance is an adapter for liquid gas

and a non-metal gasket.

• When connecting, the knee R ½ should be held ﬁ rmly to

prevent it from rotating.

• For sealing of the connection joints, use a non-metal approved

gaskets and approved sealants.

• The gaskets should only be used once. The thickness of the

ﬂ at non-metal gaskets should not be deformed more than by

25 percent.

• To connect the appliance to the gas supply, use a tested and

certiﬁ ed ﬂ exible hose.

• The ﬂ exible connection hose should be able to move freely.

It should not come into contact with the movable parts of the

kitchen furniture (e.g. a drawer), or the bottom of the cooking hob.

• If an electric oven is built into the kitchen element under the

cooking hob, it should be ﬁ tted with a cooling fan, and the

connection should be made using a pipe completely made of

metal (e.g. a stainless steel ﬂ exible pipe.

After connecting the gas hob, check the joints for any

leaks.

Gas supply connection plug

A EN ISO 10226-1 / -2 or EN ISO 228-1 (Depending on the

country-speciﬁ c connection regulations.) connection plug

B Non-metal gasket with thickness of 2 mm

C Pipe adapter for liquid gas (Depending on the country-speciﬁ c

connection regulations.)

After the connection, check the burners for correct operation.

The ﬂ ames must be clearly visible, and should be blue and green

at the center. If the ﬂ ame is unstable, increase the minimum

power. Explain the use of the burners to the user and read the

instructions for use together.

• The procedure or adaptation of the cooker to another type

of gas does not require removal of the appliance from the

worktop.

• Before adapting, disconnect the appliance from the power

mains and close the gas supply valve.

• Replace the existing nozzles for nominal thermal load with

corresponding nozzles for the new gas type (see table below).

• When adapting the appliance to liquid gas, fasten the

Adaptation to a different

type of gas

1 2 ... 12 13 14 15 16 17 18 19 20

Comentários a estes Manuais

Sem comentários

Gorenje G6N4AX Manual de Instruções Página 17

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Gorenje G6N4AX